IRONWOOD S113K Single Head Sander
Ironwood’s engineering team designed the S113K single head wide belt sander to be a robust blend of innovation, dependability, and quality. Designed for a serious woodworker who demands absolute precision in sanding, this machine will save labor and will offer versatility to perform a variety of sanding tasks. The S113K includes a combination head with a steel contact roller. Sanding head features poly-v-belt drive for smooth and vibration-free sanding results. Machine includes a programmable digital controller, enabling quick set-up times and maximum stability, precision, and sanding quality.
- Controller quickly adjusts machine thickness (+/- 0.1mm or 0.004”)
- Controller storage capacity of 99 programs for easy and fast adjustment
- Displays in mm or decimal inches (3 decimal places for inches)
- Simple push button controls for turning on and off each head
- Control switch with key for service or operation mode
- Amp meters for each sanding head
- Hour meter display
- Emergency stop
- 130 mm diameter steel contact roller
- Height adjustable sanding pad
- Fifteen (15) horsepower IE3 motor
- Poly-v belt drive
- Cutting speed of 20 m/s (65 fps)
- Cutting direction against feed
- Poly-v belt drive for sanding head for smooth and vibration-free sanding head operation
- Rubberized hold down rollers before and after sanding head with double hold down rollers at infeed and outfeed for consistent hold down
- Variable speed conveyor 4-16 m/min (13 – 52 f/min)
- Conveyor table mounted on four heavy duty jack screws for smooth, stable and accurate height adjustment
- Adjustment hand wheel for quick and easy fine height adjustments
- Automatic conveyor belt tracking for worry-free conveyor belt operation
- Electronic abrasive belt tracking
- Abrasive belt tensioning located on front of machine with safety switches for belt breakage
- Large diameter tensioning roller (100 mm)
- Abrasive belt loading assist
- Abrasive belt run-off protection
- Pneumatic disc motor braking system
- Workpiece over thickness protection system
- Safety switches on all access doors and emergency stops at infeed and outfeed locations
- Robust steel machine frame
- UL/CSA machine electrical components
- Dual voltage electrics (230V/460V)
Working width max. |
910 mm (36”) |
Conveyor belt width |
940 mm (37”) |
Abrasive belt width |
940 mm (37”) |
Abrasive belt length |
1524 mm (60”) |
Workpiece thickness min. |
3 mm (1/8”) |
Workpiece thickness max. |
125 mm (4.9”) |
Workpiece length min. |
400 mm (15.75”)* |
Variable conveyor speed |
4 – 16 MPM (13 – 52 FPM) |
Feed motor |
2 HP |
Table rise/fall motor |
½ HP |
Head #1: Combination head – 130mm Ø Steel contact roller with felt pad |
15 HP 65 fps belt speed |
Head #1: Rotation Direction |
Against the feed |
Electrical connection** |
230V | 3-Phase | 60 Hz. |
Dust collection requirements |
800 CFM |
Dust outlet – head #1 |
(2) 100 mm (4”) ports |
Compressed air requirements |
90 PSI |
Air consumption per cycle |
4 CFM |
Machine gross weight |
1,380 kg (3,045 lbs) |
Shipping dimensions (LxWxH) |
69” x 72” x 81” |
*Minimum workpiece length is based upon feeding one individual workpiece.
Abrasive belt starter kit included with machine (80, 100, 120, 150 and 180 grit)
**460V power upgrades available upon request. Additional charges may apply.